Super Damper BMW Adapter

Product information "Super Damper BMW Adapter"

BMW adapter for the ATI super damper

This flange adapts the ATI Super Damper to your BMW engine. Please note the motor selection.

Important:
- The trigger wheel is included for motors with external speed measurement (e.g. M20, M30, M50 etc).
- For engines with V-belts (e.g. M20, M30), the belt system is converted to 6pk belts! Please also order the necessary 6pk pulleys.

Contents of delivery:

Crankshaft Adapter
Screws
Trigger wheel (if necessary for operation)

Please order the ATI Super Damper in 140mm or 172mm

Product Safety Information

Eugen Schaper
Schaper Automotive
Paul-Lincke-Str.1f
30890 Barsinghausen
Germany
info@schaper-automotive.com

Super Damper

ATI Super Damper 140mm

ATI Super Damper Reduces harmful vibrations on the crankshaft. This protects the entire crank mechanism, the bearings and the oil pump! ATI's patented Super Damper is the only harmonic balancer developed exclusively for high-RPM performance engines (6000+ RPM). They feature a proven 2-in-1 elastomer design that bolts directly to the crank hub. ATI dampers are tested in Nascar competition settings and for over two million cycles in drag racing engines. Available in aluminum with a black zinc-chromate finish and with computer-controlled, laser-engraved 360-degree timing marks. Manufacturers part number: ATI918477 Outside Diameter: 140 mm This product is only the damper itself, please use one of our crankshaft adapters!

€550.00*

M20 Super Damper 6pk Set

M20 Super Damper 6pk Set ATI Damper reduces harmful vibrations on the crankshaft. This protects the entire crank drive, the bearings and the oil pump! ATI's patented Super Damper is the only harmonic vibration damper designed exclusively for high speed (6000+ RPM) engines. It features a proven 2-in-1 elastomer design that bolts directly to the crank hub. ATI dampers are tested in Nascar competition environments and over two million cycles in drag racing engines. Available in aluminum with a black zinc chromate finish and laser engraved 360 degree timing markings. Specially for speeds up to 8500rpm Outer diameter: 140 mm Matching underdriven 6pk pulleys for water pump and alternator. Power steering is omitted (can be added upon request) Content of delivery: ATI 140mm Superdamper Crankshaft hub 60-2 trigger wheel 6pk underdrive pulley for waterpump 6pk underdrive pulley for generator 6pk belt

€1,050.00*

Crate engine S38B36-RS drysump 1300hp

Crate engine S38B36-RS Universally applicable, drysump version Rated for 1300hp output Worldwide shipping by freight forwarder on a pallet Contains: Engine block + head + valvecover + oilpan incl. assembly documentation Specs: Bore: 94.00mm CR: 8.5:1 Dispacement: 3600ccm Max RPM: 8500 Max torque: 1300Nm New parts: Pistons DP 94.00mm, 8.5:1 Rods Schaper Automotive with ARP2000 bolts Rod bearings ACL std Main bearing ACL std Block girdle with ARP main studs Oil squirters Head gasket Athena 95mm Head studs ARP Valves and valve guides new Exhaust valves Supertech +1mm Cam follower Waterpump Drysump oilpan with 3x AN12 scavenge and oil scrapper Gasket kit for block and head Chain, rails and tensioner All bolts and studs new, stainless steel or yellow galvanized if possible Work done: All parts chemically and mechanically cleaned Engine block mechanically derusted and black painted Valve cover powder coated black satin Block and head measured and calibrated Block drilled and honed - clearance 0.10mm Piston rings gapped - clearance for turbo street applications Block and head surfaces milled Oil squirters machined and installed Oil return AN10 welded in chain cover 2 knocksensor seats machined Valve seats milled Valve guides renewed Valve clearance adjusted Timing adjusted Engine fully assembled

€17,500.00*

Crate engine S38B36-RS 1300hp e34

Crate engine S38B36-RS For BMW e34 Rated for 1300hp output Worldwide shipping by freight forwarder on a pallet Contains: Engine block + head + valvecover + oilpan incl. assembly documentation Specs: Bore: 94.00mm CR: 8.5:1 Dispacement: 3600ccm Max RPM: 8500 Max torque: 1300Nm New parts: Pistons DP 94.00mm, 8.5:1 Rods Schaper Automotive with ARP2000 bolts Rod bearings ACL std Main bearing ACL std Block girdle with ARP main studs Oil squirters Head gasket Athena 95mm Head studs ARP Valve guides Intale valves Exhaust valves Supertech +1mm Valve springs Cam follower Waterpump Oilpump Gasket kit for block and head Chains, rails and tensioner All bolts and studs new, stainless steel or yellow galvanized if possible Work done: All parts chemically and mechanically cleaned Engine block mechanically derusted and black painted Valve cover powder coated black satin Block and head measured and calibrated Block drilled and honed - clearance 0.10mm Piston rings gapped - clearance for turbo street applications Block and head surfaces milled Oil squirters machined and installed Oil return AN10 welded in chain cover 2 knocksensor seats machined Valve seats milled Valve guides renewed Valve clearance adjusted Timing adjusted Engine fully assembled

€17,000.00*

Crate engine M30B35-RS 1200hp e34

Crate engine M30B35-RS For BMW e34 Rated for 1200hp output Worldwide shipping by freight forwarder on a pallet Contains: Engine block + head + valvecover + oilpan incl. assembly documentation Specs: Bore: 92.50mm CR: 8.3:1 Dispacement: 3500ccm Max RPM: 8500 Max torque: 1300Nm New parts: Pistons DP 92.50mm, 8.3:1 Rods Schaper Automotive with ARP2000 bolts Rod bearings ACL std Main bearing ACL std Block girdle with ARP main studs Oil squirters Head gasket Athena 93mm Head studs ARP Valves and valve guides new Camshaft Catcams 301° turbo Valve springs Catcams PAC-95009 Rockers steel, reinforced Waterpump Oilpump Gasket kit for block and head Chains, rails and tensioner All bolts and studs new, stainless steel or yellow galvanized if possible Work done: All parts chemically and mechanically cleaned Engine block mechanically derusted and black painted Valve cover powder coated black satin Block and head measured and calibrated Block drilled and honed - clearance 0.10mm Piston rings gapped - clearance for turbo street applications Block and head surfaces milled Oil squirters machined and installed Oil return AN10 welded in chain cover 2 knocksensor seats machined Valve seats milled Valve guides renewed Valve clearance adjusted Timing custom adjusted Engine fully assembled

€13,000.00*

M30/S38 block girdle

M30/S38 block girdle set Stiffening plate made of steel with ARP main bearing studs enables better distribution of forces in the bearing blocks and the entire engine block and allows very high boost pressures. A must for boost pressures from 1.5bar. ARP studs ensure a firm hold of the bearing blocks. Contains: Stiffening plate made of steel (thermal expansion based on block) ARP main bearing studs Spacers Longer oil pan bolts Longer chain for the oil pump Installation instructions

€590.00*

Crate engine M30B35-RS drysump 1200hp

Crate engine M30B35-RS Universally applicable, drysump version Rated for 1200hp output Worldwide shipping by freight forwarder on a pallet Contains: Engine block + head + valvecover + oilpan incl. assembly documentation Specs: Bore: 92.50mm CR: 8.3:1 Dispacement: 3500ccm Max RPM: 8500 Max torque: 1300Nm New parts: Pistons DP 92.50mm, 8.3:1 Rods Schaper Automotive with ARP2000 bolts Rod bearings ACL std Main bearing ACL std Block girdle with ARP main studs Oil squirters Head gasket Athena 93mm Head studs ARP Valves and valve guides new Camshaft Catcams 301° turbo Valve springs Catcams PAC-95009 Rockers steel, reinforced Waterpump Drysump oilpan with 3x AN12 scavenge and oil scrapper Gasket kit for block and head Chain, rails and tensioner All bolts and studs new, stainless steel or yellow galvanized if possible Work done: All parts chemically and mechanically cleaned Engine block mechanically derusted and black painted Valve cover powder coated black satin Block and head measured and calibrated Block drilled and honed - clearance 0.10mm Piston rings gapped - clearance for turbo street applications Block and head surfaces milled Oil squirters machined and installed Oil return AN10 welded in chain cover 2 knocksensor seats machined Valve seats milled Valve guides renewed Valve clearance adjusted Timing custom adjusted Engine fully assembled

€13,500.00*

ATI Super Damper 172mm

ATI Super Damper Reduces harmful vibrations on the crankshaft. This protects the entire crank mechanism, the bearings and the oil pump! ATI's patented Super Damper is the only harmonic balancer developed exclusively for high-RPM performance engines (6000+ RPM). They feature a proven 2-in-1 elastomer design that bolts directly to the crank hub. ATI dampers are tested in Nascar competition settings and for over two million cycles in drag racing engines. Available in aluminum with a black zinc-chromate finish and with computer-controlled, laser-engraved 360-degree timing marks. Manufacturers part number: ATI917071 Outside Diameter: 172.2 mm This product is only the damper itself, please use one of our crankshaft adapters!

€499.00*

Crate engine M30B35-RS 1200hp e24 and e28

Crate engine M30B35-RS For BMW e24 and e28 Rated for 1200hp output Worldwide shipping by freight forwarder on a pallet Contains: Engine block + head + valvecover + oilpan incl. assembly documentation Specs: Bore: 92.50mm CR: 8.3:1 Dispacement: 3500ccm Max RPM: 8500 Max torque: 1300Nm New parts: Pistons DP 92.50mm, 8.3:1 Rods Schaper Automotive with ARP2000 bolts Rod bearings ACL std Main bearing ACL std Block girdle with ARP main studs Oil squirters Head gasket Athena 93mm Head studs ARP Valves and valve guides new Camshaft Catcams 301° turbo Valve springs Catcams PAC-95009 Rockers steel, reinforced Waterpump Oilpump Gasket kit for block and head Chains, rails and tensioner All bolts and studs new, stainless steel or yellow galvanized if possible Work done: All parts chemically and mechanically cleaned Engine block mechanically derusted and black painted Valve cover powder coated black satin Block and head measured and calibrated Block drilled and honed - clearance 0.10mm Piston rings gapped - clearance for turbo street applications Block and head surfaces milled Oil squirters machined and installed Oil return AN10 welded in chain cover 2 knocksensor seats machined Valve seats milled Valve guides renewed Valve clearance adjusted Timing custom adjusted Engine fully assembled

€13,000.00*