Supercharger Kit Z3M - 650
Product number:
75921
Product information "Supercharger Kit Z3M - 650"
Supercharger kit for BMW Z3M with C38R-112 unit
Performance range: 450-650hp
Contents:
- Supercharger Rotrex C38R-112 with 80mm 10pk pulley
- External oilsystem - Expansion tank and lines
- Mocal compressor oil cooler, 13 rows
- 1l supercharger oil Rotrex SF150
- Bracket system made of high-strength aluminum (mounting position: exhaust side, bottom)
- Crankpulley 10pk
- Automatic tensioner
- Optibelt drive belt 10pk
- Modificated airbox
- 102mm K&N air filter
- 40mm aluminium blow off valve
- HighFlow front mount intercooler 600 x 300 x 65mm
- 63.5mm charge air pipes hand made of aluminum
- Black silicone hoses
- SS-clamps
- Installation instructions
- Service book
Attention: the air conditioning compressor will be removed!
Attention: the HFM will be removed! For standalone ECUs only!
Suitable for manual and automatic transmissions.
Recommended modifications to the driveline and peripherals:
- Standalone ECU Link G4 S50/S52 PnP
- Spark plugs for compressor operation
- Bosch 625ccm fuel injectors
- Walbro 340lph fuel pump
- Athena headgasket
- ARP headstuds
- DP pistons
- ZRP conrods
- Reinforced clutch
- Larger exhaust system (at least 2x65mm)
- For road traffic: Schaper CV-set (crankcase ventilation)
* The actual resulting engine performance depends on many factors and can be higher or lower than stated. A smaller pulley on the compressor can be used to increase the boost pressure.
| Engine: | S50B30, S50B32 |
|---|
Recommended products
Fuel injector 625ccm with adapter to EV1
€59.00*
Original Bosch 0280158123 injector EV14 625 ccm
Design: EV14-xt, with adapter to EV1 form (long)High resistance (12-15 ohms)
6 jet nozzle head
Flow rate: 625ccm at 3 bar
MAF Sensor 400hp
€250.00*
Performance range 200 - 400 PS (up to 1050kg / h)
Connection diameter: 89mm
Including connector
The MAF sensor is used to measure the air mass flow in order to be able to adapt the injection quantity precisely to the power requirement, the air pressure and the air temperatures.
Original Bosch hot film air mass meter HFM-2-9.7 (housing including sensor)
Bosch Art.-Nr.: 0 280 217 800
Compact design
Light weight
Fast response time
Low power consumption
Reverse flow detection
Connection diameter: 89mm
Connector: 4-pin
Measuring range: 0-5 volts, up to 1050kg / h
MAF Sensor 700hp
€280.00*
Performance range 400 - 700 PS (up to 1800kg / h)
Connection diameter: 89mm
Including connector
The MAF sensor is used to measure the air mass flow in order to be able to adapt the injection quantity precisely to the power requirement, the air pressure and the air temperatures.
Original Bosch hot film air mass meter HFM-5-9.7 (housing including sensor)
Bosch Art.-Nr.: 0 280 218 067
Compact design
Light weight
Fast response time
Low power consumption
Reverse flow detection
Connection diameter: 89mm
Connector: 5-pin
Measuring range: 0-5 volts, up to 1800kg / h
Connector: 1J0973775A
Pinout:
Pin 1 - IAT sensor output (not used on MS42 or MS43)
Pin 2 - voltage input 12V (red/white)
Pin 3 - common ground (black)
Pin 4 - voltage input 5V (brown/white)
Pin 5 - MAF sensor output (yellow
Download:
Calibration