Supercharger Kit E39 M52 M54 - 480

€4,700.00*

Prices incl. VAT plus shipping costs

Available in 14 days, delivery time 1-3 days

Product number: 75146

Product information "Supercharger Kit E39 M52 M54 - 480"

Supercharger kit for BMW E39 M52 and M54 520i-530i with Rotrex C38-91 unit

Performance range: 350-480hp

Contents:

Supercharger Rotrex C38-91 with 80mm pulley
External oilsystem - Expansion tank and lines
Mocal compressor oil cooler, 13 rows
1l Rotrex SF150 supercharger oil
Bracket system made of high-strength aluminum
SKF idler pulleys
Optibelt drive belt 6pk
Intake system made of innovative PA12-CF plastic
89mm K&N air filter
25mm aluminium blow off valve
HighFlow front mount intercooler 550 x 180 x 65mm
60mm charge air pipes hand made of aluminum
Black silicone hoses
SS-clamps
Installation instructions
Service book

Suitable for manual and automatic transmissions.

Suggested modifications to the driveline and peripherals:

Spark plugs for compressor operation
Bosch 470ccm fuel injectors
Air mass meter 89mm
Walbro 255lph fuel pump
MLS head gasket
ARP head studs
Reinforced clutch
Tubular exhaust manifold and larger exhaust system (at least 2x60mm)
For road traffic: Schaper CV-set (crankcase ventilation)

* The actual resulting engine performance depends on many factors and can be higher or lower than stated. A smaller pulley on the compressor can be used to increase the boost pressure.

Engine:	M52, M52tu, M54

Recommended products

Fuel injector 470ccm

Original Bosch 0280156280 injector EV6 470ccm Design: EV6 High resistance (12-15 ohms) 4 jet nozzle head Flow rate: 470ccm at 3 bar

€40.00*

MAF Sensor 700hp

Performance range 400 - 700 PS (up to 1800kg / h) Connection diameter: 89mm Including connector The MAF sensor is used to measure the air mass flow in order to be able to adapt the injection quantity precisely to the power requirement, the air pressure and the air temperatures. Original Bosch hot film air mass meter HFM-5-9.7 (housing including sensor) Bosch Art.-Nr.: 0 280 218 067 Compact design Light weight Fast response time Low power consumption Reverse flow detection Connection diameter: 89mm Connector: 5-pin Measuring range: 0-5 volts, up to 1800kg / h Connector: 1J0973775A Pinout: Pin 1 - IAT sensor output (not used on MS42 or MS43) Pin 2 - voltage input 12V (red/white) Pin 3 - common ground (black) Pin 4 - voltage input 5V (brown/white) Pin 5 - MAF sensor output (yellow Download: Calibration

€280.00*

MAF Sensor 400hp

Performance range 200 - 400 PS (up to 1050kg / h) Connection diameter: 89mm Including connector The MAF sensor is used to measure the air mass flow in order to be able to adapt the injection quantity precisely to the power requirement, the air pressure and the air temperatures. Original Bosch hot film air mass meter HFM-2-9.7 (housing including sensor) Bosch Art.-Nr.: 0 280 217 800 Compact design Light weight Fast response time Low power consumption Reverse flow detection Connection diameter: 89mm Connector: 4-pin Measuring range: 0-5 volts, up to 1050kg / h

€250.00*

Remote tuning M52tu supercharger

Remote tuning for M52tu supercharger conversion E46, E39, Z3 with MS42 ECU This tuning package includes FULL remote tuning for your MS41 engine control with supercharging. This means that you will receive basic dataset based on how your vehicle is set up. We then carry out data recording in order to optimize the tuning calibrations for your vehicle. Dyno tuning is of course possible. Please note that this involves additional costs. If you want to change the boost level, injectors, fuel, etc. during the tuning process, a retuning fee will apply. There is no point in calculating a whole new tune if only a small portion of it changes, but note that this tuning package pays to create a tuning calibration for the CURRENT setup. After purchase you will receive an email with our software download and instructions on how the tuning process works. It's a very simple process. You need a Windows laptop and a K+DCAN OBD2 cable. You may also need a BMW 20-pin round connector for the OBD2 adapter (available from us). 1. Read all error codes and save them for later. 2. Create a backup copy of the current ECU and send it to us by email. 3. We will then create your basic data and send it to you for uploading. 4. As we move forward, we will exchange data protocols and revisions until your current configuration is optimized.

€799.00*

Spark plugs for M42 M44 High Boost

Spark plugs M42 / M44 High Boost 4 spark plugs for boost pressure from 1 bar Material: Platinum Manufacturer NGK

€90.00*

Spark plugs for M50 M52 M54 Low Boost

Spark plugs M50 / M52 / M54 Low Boost 6 spark plugs for boost pressure up to 1bar of boost Manufacturer: NGK

€36.00*

Spark plugs for M42 M44 Low Boost

Spark plugs M42 / M44 Low Boost 4 spark plugs for boost pressure up to 1bar of boost Manufacturer: NGK

€24.00*

Spark plugs for M50 M52 M54 High Boost

Spark plugs M50 / M52 / M54 High Boost 6 spark plugs for boost pressure from 1 bar Material: Platinum Manufacturer NGK

€120.00*

Spark plugs for M20 M30 Low Boost

Spark plugs M20 / M30 Low Boost 6 spark plugs for boost pressure up to 1bar of boost Manufacturer: NGK

€36.00*

Remote tuning M52 supercharger

Remote tuning for M52 supercharger conversion E36, E38, E39, Z3 with MS41 ECU This tuning package includes FULL remote tuning for your MS41 engine control with supercharging. This means that you will receive basic dataset based on how your vehicle is set up. We then carry out data recording in order to optimize the tuning calibrations for your vehicle. Dyno tuning is of course possible. Please note that this involves additional costs. If you want to change the boost level, injectors, fuel, etc. during the tuning process, a retuning fee will apply. There is no point in calculating a whole new tune if only a small portion of it changes, but note that this tuning package pays to create a tuning calibration for the CURRENT setup. After purchase you will receive an email with our software download and instructions on how the tuning process works. It's a very simple process. You need a Windows laptop and a K+DCAN OBD2 cable. You may also need a BMW 20-pin round connector for the OBD2 adapter (available from us). 1. Read all error codes and save them for later. 2. Create a backup copy of the current ECU and send it to us by email. 3. We will then create your basic data and send it to you for uploading. 4. As we move forward, we will exchange data protocols and revisions until your current configuration is optimized.

€799.00*

Remote tuning M54 supercharger

Remote tuning for M52 supercharger conversion E46, E60, E39, Z4 with MS41 ECU This tuning package includes FULL remote tuning for your MS43 engine control with supercharging. This means that you will receive basic dataset based on how your vehicle is set up. We then carry out data recording in order to optimize the tuning calibrations for your vehicle. Dyno tuning is of course possible. Please note that this involves additional costs. If you want to change the boost level, injectors, fuel, etc. during the tuning process, a retuning fee will apply. There is no point in calculating a whole new tune if only a small portion of it changes, but note that this tuning package pays to create a tuning calibration for the CURRENT setup. After purchase you will receive an email with our software download and instructions on how the tuning process works. It's a very simple process. You need a Windows laptop and a K+DCAN OBD2 cable. You may also need a BMW 20-pin round connector for the OBD2 adapter (available from us). 1. Read all error codes and save them for later. 2. Create a backup copy of the current ECU and send it to us by email. 3. We will then create your basic data and send it to you for uploading. 4. As we move forward, we will exchange data protocols and revisions until your current configuration is optimized.

€799.00*

Spark plugs for M20 M30 High Boost

Spark plugs M20 / M30 High Boost 6 spark plugs for boost pressure from 1 bar Material: Iridium Manufacturer NGK

€130.00*

Spark plugs for S50 S52 S54 High Boost

Spark plugs S50 / S52 / S54 High Boost 6 spark plugs for boost pressure from 1 bar Material: Iridium Manufacturer NGK

€96.00*