Supercharger Kit E36 M50 M52 - 350
Product number:
75121
Product information "Supercharger Kit E36 M50 M52 - 350"
Supercharger kit for BMW E36 M50 and M52 320i-328i with Rotrex C30-94 unit
Performance range: 250-350hp
Contens:
- Supercharger Rotrex C30-94 with 85mm pulley
- External oilsystem - Expansion tank and lines
- 1l Rotrex SF150 supercharger oil
- Bracket system made of high-strength aluminum
- SKF idler pulleys
- Optibelt drive belt 6pk
- Intake system made of innovative PA12-CF plastic
- 89mm K&N air filter
- 25mm aluminium blow off valve
- HighFlow front mount intercooler 550 x 180 x 65mm
- 60mm charge air pipes hand made of aluminum
- Black silicone hoses
- SS-clamps
- Installation instructions
- Service book
Can be operated with the standard engine control unit - we offer programming for this.
Attention! ASC no longer applies.
Suitable for manual and automatic transmissions.
Recommended modifications to the driveline and peripherals:
- ECU programming by us (remote tuning)
- Spark plugs for compressor operation
- Bosch 380ccm fuel injectors
- Air mass meter 89mm
- Reinforced clutch
- Tubular exhaust manifold and larger exhaust system (at least 2x60mm)
- For racing purposes: Mocal compressor oil cooler, 13 rows
* The actual resulting engine performance depends on many factors and can be higher or lower than stated. A smaller pulley on the compressor can be used to increase the boost pressure.
| Engine: | M50, M52 |
|---|
Suggested products
Remote tuning M52 supercharger
€799.00*
Remote tuning for M52 supercharger conversion E36, E38, E39, Z3 with MS41 ECU
This tuning package includes FULL remote tuning for your MS41 engine control with supercharging.
This means that you will receive basic dataset based on how your vehicle is set up.
We then carry out data recording in order to optimize the tuning calibrations for your vehicle.
Dyno tuning is of course possible. Please note that this involves additional costs.
If you want to change the boost level, injectors, fuel, etc. during the tuning process, a retuning fee will apply.
There is no point in calculating a whole new tune if only a small portion of it changes, but note that this tuning package pays to create a tuning calibration for the CURRENT setup.
After purchase you will receive an email with our software download and instructions on how the tuning process works.
It's a very simple process.
You need a Windows laptop and a K+DCAN OBD2 cable. You may also need a BMW 20-pin round connector for the OBD2 adapter (available from us).
1. Read all error codes and save them for later.
2. Create a backup copy of the current ECU and send it to us by email.
3. We will then create your basic data and send it to you for uploading.
4. As we move forward, we will exchange data protocols and revisions until your current configuration is optimized.
Fuel injector 440ccm
€40.00*
Original Bosch 0280155968 injector EV6 440ccm
Design: EV6
High resistance (12-15 ohms)
4 jet nozzle head
Flow rate: 440ccm at 3 bar
MAF Sensor 400hp
€250.00*
Performance range 200 - 400 PS (up to 1050kg / h)
Connection diameter: 89mm
Including connector
The MAF sensor is used to measure the air mass flow in order to be able to adapt the injection quantity precisely to the power requirement, the air pressure and the air temperatures.
Original Bosch hot film air mass meter HFM-2-9.7 (housing including sensor)
Bosch Art.-Nr.: 0 280 217 800
Compact design
Light weight
Fast response time
Low power consumption
Reverse flow detection
Connection diameter: 89mm
Connector: 4-pin
Measuring range: 0-5 volts, up to 1050kg / h
Spark plugs for M50 M52 M54 Low Boost
€36.00*
Spark plugs M50 / M52 / M54 Low Boost
6 spark plugs for boost pressure up to 1bar of boost
Manufacturer: NGK
Fuelpump Walbro 255 - 500hp
€110.00*
Fuel pump Walbro 255 GSS341
Fuel: Gasoline
Engine power: 300 - 550 hp
Flow rate at 3 bar and 13.5V: 255 liters/hour
Maximum system pressure: 7.7bar
Inlet diameter: 39mm
Hose connection: 9mm
Weight: 360g
Made in USA