Supercharger Kit E36 M3 - 500
Product number:
75125
Product information "Supercharger Kit E36 M3 - 500"
Supercharger kit for BMW E36 S50 and S52 with Rotrex C38-92 unit
Performance range: 400-500hp
Contents:
- Supercharger Rotrex C38-92 with 80mm pulley
- External oilsystem - Expansion tank and lines
- Mocal compressor oil cooler, 13 rows
- 1l Rotrex SF150 supercharger oil
- Bracket system made of high-strength aluminum
- SKF idler pulleys
- Optibelt drive belt 6pk
- Modificated airbox
- Intake system made of innovative PA12-CF plastic
- 89mm K&N air filter
- 40mm aluminium blow off valve
- HighFlow front mount intercooler 550 x 230 x 65mm
- 60mm charge air pipes hand made of aluminum
- Black silicone hoses
- SS-clamps
- Installation instructions
- Service book
Can be operated with the standard engine control unit - we offer programming for this.
Suitable for manual and automatic transmissions.
Suggested modifications to the driveline and peripherals:
- ECU programming by us (remote tuning)
- Spark plugs for compressor operation
- Bosch 470ccm fuel injectors
- Air mass meter 89mm
- Walbro 255lph fuel pump
- MLS head gasket
- ARP head studs
- Reinforced clutch
- Larger exhaust system (at least 2x65mm)
* The actual resulting engine performance depends on many factors and can be higher or lower than stated. A smaller pulley on the compressor can be used to increase the boost pressure.
| Engine: | S50B30 |
|---|
Recommended products
Fuel injector 470ccm
€40.00*
Original Bosch 0280156280 injector EV6 470ccm
Design: EV6
High resistance (12-15 ohms)
4 jet nozzle head
Flow rate: 470ccm at 3 bar
MAF Sensor 400hp
€250.00*
Performance range 200 - 400 PS (up to 1050kg / h)
Connection diameter: 89mm
Including connector
The MAF sensor is used to measure the air mass flow in order to be able to adapt the injection quantity precisely to the power requirement, the air pressure and the air temperatures.
Original Bosch hot film air mass meter HFM-2-9.7 (housing including sensor)
Bosch Art.-Nr.: 0 280 217 800
Compact design
Light weight
Fast response time
Low power consumption
Reverse flow detection
Connection diameter: 89mm
Connector: 4-pin
Measuring range: 0-5 volts, up to 1050kg / h
MAF Sensor 700hp
€280.00*
Performance range 400 - 700 PS (up to 1800kg / h)
Connection diameter: 89mm
Including connector
The MAF sensor is used to measure the air mass flow in order to be able to adapt the injection quantity precisely to the power requirement, the air pressure and the air temperatures.
Original Bosch hot film air mass meter HFM-5-9.7 (housing including sensor)
Bosch Art.-Nr.: 0 280 218 067
Compact design
Light weight
Fast response time
Low power consumption
Reverse flow detection
Connection diameter: 89mm
Connector: 5-pin
Measuring range: 0-5 volts, up to 1800kg / h
Connector: 1J0973775A
Pinout:
Pin 1 - IAT sensor output (not used on MS42 or MS43)
Pin 2 - voltage input 12V (red/white)
Pin 3 - common ground (black)
Pin 4 - voltage input 5V (brown/white)
Pin 5 - MAF sensor output (yellow
Download:
Calibration